AutoAqua Smart ATO RO

Smart ATO RO is a reliable device that can automate refilling your ATO reservoir without forgetting to turn off your RO/DI system and in risk of catastrophic floods.

The compact design suitable for all containers sizes with magnetic-mount dual optical sensors.

Equipped with two dual sensors and a float valve kit which enhanced protection against overfilling.

With a built-in timer , the QST provides real-time failsafe protection to prevent any failure situation along with audible and LED Indicator alarm.

The special design of the Smart ATO RO can prevent the connector of the pump and the power adapter from being rusted or damaged due to water and ensure users safety and longer product lifetime.

Smart ATO RO is a reliable device to fill your RO or RO/DI water reservoir automatically. When the water level falls down to the low-level sensor, it will fill the reservoir up to the high-level sensor. You can avoid TDS creep in the reservoir and always get clear RO or RO/DI water for your aquariums but never have to worry about forgetting to turn off your RO or RO/DI system causing catastrophic floods.

Smart ATO RO comes with two precise dual sensors along with a float ball switch which provide extremely protection to prevent accidental floods.

• Power :
  – Power Input : 100-240 VAC 50-60 Hz
  – Power : 4.5 W @ DC 12 V
  – Power Cord Length : 6 feet (180 cm)
• DC Solenoid Valve :
  – Power : 6W @ 12 VDC
  – Pressure : 0.02-0.7MPA
  – Port : 1/4-inch RO Tubing Connection
  – Cable Length : 4 feet (120 cm)
• Max. Mounting Thickness :
  – Sensor : 1/2 inch (12.7 mm)
  – Universal Tube Holder : 3/4 inch (19 mm)
• Length of Cable between Sensor and Controller : 6 feet (180cm)
• Tubing :
  – Length : 9.8 feet (300 cm)
  – 1/4-inch RO Tubing